4 Pack 1.5In Bolt-on Wheel Spacer 12x1.5 Studs, 6x5.5 to 6x5.5 (139.7mm)Bolt Pattern, 108mm Hub Bore, Tacoma/Tundra/4Runner/Sequoia, for Chevy/GMC/Ford/Lexus, Isuzu/Mazda, Mitsubish/Kia/Hyundai

Buyers Should Be aware to Check and Confirm Spec below Even if we listed your vehicle as compatible: 【1】Bolt Pattern: 6x5.5 Inch (6x139.7mm)【2】Wheel Studs: 12x1.5 threads, Shorter than 1.5" (38mm)【3】There is enough space between fender and tires.【4】Center bore compatible with: 4.25 Inch(108mm)Vehicle Application:For TOYOTA1989-1995 4Runner (N120, N130)1996-2020 4Runner (N180)2001-2020 Toyota Tacoma, 6 Lug2006-2014 FJ Cruiser, 6 Lug2001-2007 Sequoia I2000-2006 Tundra I1995-2011 HiAce1989-2016 HiLux 4WD (N80, N90- N160, N170)Land Cruiser (J60, J70 -J120, J150)For ISUZU2002-2016 D-Max1988-2002 Pickup1981-2002 TrooperFor Mazda 1985-2006 B-series 2WD & 4x42006-2016 BT-50 2WD & 4x41983-2016 E2000/E2200For MITSUBISHI1996-2017 L200 4x4 / Pickup1991-2017 Pajero Sport/Shogun2004-2012 for Chevy Colorado/GMC Canyon, Gen 12006-2010 For HUMMER H32008-2016 for Hyundai H-1/Starex/Terracan2007-2014 for KIA Carnival/Sedona1998-2017 for Ford Ranger, 6 bolt2003-2009 for LEXUS GX 470 /GX 4602001-2006 for SSANGYONG Rexton, Gen 1*Spacers will also apply on more vehicles, kindly verify using spacer specs.*Installation surface of the hub and spacer must be perfectly aligned and close fit.*It's Required and Necessary to Re-Torque the Spacers after the first 50-100 miles of driving, to prevent the nut from backing off due to the thermal stresses.*Professional installation was highly recommended.*Tools may needed if DIY:⅜” torque wrench (at least 100 ft-lbs) ⅜” mechanic’s socket set Tire iron OR ½” ratchet and socket setLow-profile floor jack and jack stands etc.

• 【Specification】Thickness & Pack: 1.5Inch(38mm) x 4 Pcs, Wheel & Vehicle Bolt Pattern: 6x5.5 to 6x5.5 Inch(6x139.7mm), Stud size: 12x1.5, Center Bore: 4.25 Inch(108mm), Type: Lugcentric Bolt-on Spacers. Bolt Grade: 10.9, Spacer Material: 6061-T6 high-strength Aluminum Billet, Finish: Hard-Anodized Silver.
• 【Application】M12X1.5 Studs for Toyota Tacoma/Tundra/4Runner/FJ Cruiser, for Ford Ranger/Mazda BT-50/B(E)-series, for Isuzu I-290/350/370/D-Max/Pickup/Trooper, for Chevy Colorado Gen 1/GMC Canyon/Hummer H3, for Hyundai H-1/Starex/Terracan/Kia Carnival/Sedona, for Mitsubishi L200/Lexus GX460/470, etc. May fit other vehicles, kindly verify using spacer specs.
• 【Benefit】Wheel spacer help stop wheels and tires from rubbing against the liners, brakes, or other suspension parts, by creating additional space between tires and hubs also being a great solution for complex and costly staggered/negative offset wheel setup, making your vehicle more aggressive, tougher, and stable, allowing lift/lowering kits, larger calipers, or traction tires installation.
• 【Installation】It’s pretty easy to install if you're a skilled mechanic and you got the correct spacers, however, we do not wanna stress too much about how easy or helpful it was and the time that will save as well as your money, Kindly Read the Description Content and Make it Fit First, Professional Installation was Recommended.
• 【Warranty & Service】ALL VIPCAR wheel spacers backed in 24 Month/50,000 Miles Warranty. For any pre or after-sale replacements or performance questions or solutions, just email us and we will provide a professional, friendly, and supportive reply within 24 hours, let's hit it!